Search
Browse Categories
Browse by Manufacturer

Simpson SET-XP High-Strength Anchoring Adhesive for Cracked and Uncracked Concrete

High Strength Anchoring Adhesive - Simpson SET XP - 8.50oz
High Strength Anchoring Adhesive - Simpson SET XP - 8.50ozHigh Strength Anchoring Adhesive - Simpson SET XP - 22ozHigh Strength Anchoring Adhesive - Simpson SET XP - 56oz
Price: From $27.24 to $125.60
Manufacturer: Simpson Strong-Tie
This product typically will ship same day

Product Options

Cartridge Size:
SET-XP® is a 1:1 two-component, high-solids, epoxy-based anchoring adhesive formulated for optimum performance in both cracked and uncracked concrete. SET-XP® adhesive has been rigorously tested in accordance with ICC-ES AC308 and 2009 IBC requirements and has proven to offer increased reliability in the most adverse conditions, including performance in cracked concrete under static and seismic loading. SET-XP® adhesive is teal in color in order to be identified as a high-performance adhesive for adverse conditions. Resin and hardener are dispensed and mixed simultaneously through the mixing nozzle. SET-XP® adhesive exceeds the ASTM C 881 specification for Type I and Type IV, Grade 3, Class C epoxy.

When SET-XP® adhesive is used with all threaded rod or rebar, the system can be used in tension and seismic zones where there is a risk of cracks occurring that pass through the anchor location. It is also suitable for uncracked concrete conditions.

APPLICATION

Surfaces to receive epoxy must be clean. The base-material temperature must be 50º F or above at the time of installation. For best results, material should be 70–80º F at the time of application. Cartridges should not be immersed in water to facilitate warming. To warm cold material, the cartridges should be stored in a warm, uniformly-heated area or storage container for a sufficient time to allow epoxy to warm completely. Mixed material in nozzle can harden in 5–7 minutes at a temperature of 40º F or above.

SUGGESTED SPECIFICATION

Anchoring adhesive shall be a two-component high-solids, epoxy-based system supplied in manufacturer's standard cartridge and dispensed through a staticmixing nozzle supplied by the manufacturer. The adhesive anchor shall have been tested and qualified for performance in cracked and uncracked concrete per ICC-ES AC308. Adhesive shall be SET-XP® adhesive from Simpson Strong-Tie, Pleasanton, CA. Anchors shall be installed per Simpson Strong-Tie instructions for SET-XP epoxy adhesive.

SHELF LIFE

24 months from date of manufacture in unopened sideby-side cartridge.

STORAGE CONDITIONS

For best results, store between 45–90° F. To store partially used cartridges, leave hardened nozzle in place. To re-use, attach new nozzle.

Related Products

Simpson CDT10S Manual Adhesive Dispensing Tool
Price: Price Per Tool = $44.90
Simpson CDT10S Manual Adhesive Dispensing Tool
The CDT10S features a steel carriage for ultimate durability and is engineered for continuous, high-volume use. The CDT10S also features double-gripping plates that help extend tool life.
Simpson EDT22S Manual Adhesive Dispensing Tool for 22 oz. Epoxy Adhesive Cartridges
Price: Price Per Tool = $104.84
Simpson EDT22S Manual Adhesive Dispensing Tool for 22 oz. Epoxy Adhesive Cartridges
The EDT22S epoxy adhesive tool features a steel carriage and is engineered for high-volume, continuous use. The tool can be easily convert from dispensing a 22 oz. 1:1 ratio cartridge to a 16.5 oz. 2:1 ratio cartridges.
Simpson EDTA22CKT Battery-Powered Dispensing Tool for 22 oz. Epoxy Adhesive Cartridges
Price: Price Per Tool = $1054.72
Simpson EDTA22CKT Battery-Powered Dispensing Tool for 22 oz. Epoxy Adhesive Cartridges
The EDTA22C offers power dispensing of 22 oz., 1:1 ratio, dual-cartridge adhesives without the need for a hose or compressor. The tool features dosage and rate control for maximum efficiency on the job. This heavy-duty dispensing tool is designed to work
Adhesive Dispensing Tool - Simpson EDTA22P
Simpson EDTA22P Pneumatic Dispensing Tool for 22 oz. Epoxy Adhesive Cartridges
Price: Price Per Tool = $906.78
Simpson EDTA22P Pneumatic Dispensing Tool for 22 oz. Epoxy Adhesive Cartridges
The EDTA22P tool features an optional suitcase handle adapter for the ultimate in tool configuration and dispensing convenience. The suitcase option enables easier and time-saving ground-level doweling. The heavy duty tool comes with a custom, blow-molded
Adhesive Dispensing Tool - Simpson EDTA56P
Simpson EDTA56P Pneumatic Dispensing Tool for 56 oz. Epoxy-Tie Adhesive Cartridges
Price: Price Per Tool = $944.04
Simpson EDTA56P  Pneumatic Dispensing Tool for 56 oz. Epoxy-Tie Adhesive Cartridges
The EDTA56P tool features an optional suitcase handle adapter for the ultimate in tool configuration and dispensing convenience. The suitcase option enables easier and time-saving ground-level doweling. The heavy duty tool comes with a custom, blow-molded
Simpson EMN22I Epoxy Adhesive Mixing Nozzle
Price: Price Per Nozzle = $4.76
Simpson EMN22I Epoxy Adhesive Mixing Nozzle
An 18-element mixing nozzle for use with 22 oz. and 56 oz. epoxy adhesives cartridges. This is a one-piece nozzle with integrated nut (separate retaining nut not required). Works with EDOT, ET-HP, SET and SET-XP adhesives.
Shopping Cart
Your cart is empty.