Search
Browse Categories
Browse by Manufacturer

Simpson SET Anchoring Adhesive


Price: From $15.76 to $92.76
Manufacturer: Simpson Strong-Tie
This product typically will ship same day

Product Options

Cartridge Size:
SET® is a two-component, 1:1 ratio, high-solids, epoxy-based adhesive for use as a high strength, non-shrink anchor grouting material. Resin and hardener are dispensed and mixed simultaneously through the mixing nozzle. SET meets or exceeds the requirements of ASTM C-881 specification for Type I, II, IV and V, Grade 3, Class B and C.

USES

  • Threaded-rod anchoring
  • Rebar doweling
  • Bonding hardened concrete to hardened concrete
  • Pick-proof sealant around doors, windows and fixtures
  • Paste-over for crack injection

APPLICATION

Surfaces to receive epoxy must be clean. For installations in or through standing water, see Supplemental Topics for Adhesive Anchors for details. The base material temperature must be 40°F or above at the time of installation. For best results, material should be 70°–80°F at the time of application. Cartridges should not be immersed in water to facilitate warming. To warm cold material, the cartridges should be stored in a warm, uniformly heated area or storage container for a sufficient time to allow epoxy to warm completely. Mixed material in nozzle can harden in 5–7 minutes at a temperature of 40°F or above.

SUGGESTED SPECIFICATION

Anchoring adhesive shall be a two-component high-solids epoxy based system supplied in manufacturer's standard cartridge and dispensed through a staticmixing nozzle supplied by the manufacturer. Epoxy shall meet the minimum requirements of ASTM C-881 specification for Type I, II, IV, and V, Grade 3, Class B and C and must develop a minimum 12,650 psi compressive yield strength after 7 day cure. Epoxy must have a heat deflection temperature of a minimum 136°F (58°C). Adhesive shall be SET adhesive from Simpson Strong-Tie, Pleasanton, CA. Anchors shall be installed per Simpson Strong-Tie instructions for SET adhesive.

SHELF LIFE

24 months from date of manufacture in unopened sideby- side cartridge.

STORAGE CONDITIONS

For best results store between 45°F – 90°F. To store partially used cartridges, leave hardened nozzle in place. To re-use, attach new nozzle.

Related Products

Screen Tube - Simpson Epoxy - Carbon Steel
Simpson Epoxy (SET and ET-HP) Screen Tube Carbon Steel
Price: From $3.78 to $9.80
Simpson Epoxy (SET and ET-HP) Screen Tube Carbon Steel
Screen tubes are used in hollow base material applications to contain adhesive around the anchor and prevent it from running into voids. Lengths available 6" - 21"
Simpson EDT22S Manual Adhesive Dispensing Tool for 22 oz. Epoxy Adhesive Cartridges
Price: Price Per Tool = $104.84
Simpson EDT22S Manual Adhesive Dispensing Tool for 22 oz. Epoxy Adhesive Cartridges
The EDT22S epoxy adhesive tool features a steel carriage and is engineered for high-volume, continuous use. The tool can be easily convert from dispensing a 22 oz. 1:1 ratio cartridge to a 16.5 oz. 2:1 ratio cartridges.
Simpson EDTA22CKT Battery-Powered Dispensing Tool for 22 oz. Epoxy Adhesive Cartridges
Price: Price Per Tool = $1054.72
Simpson EDTA22CKT Battery-Powered Dispensing Tool for 22 oz. Epoxy Adhesive Cartridges
The EDTA22C offers power dispensing of 22 oz., 1:1 ratio, dual-cartridge adhesives without the need for a hose or compressor. The tool features dosage and rate control for maximum efficiency on the job. This heavy-duty dispensing tool is designed to work
Adhesive Dispensing Tool - Simpson EDTA22P
Simpson EDTA22P Pneumatic Dispensing Tool for 22 oz. Epoxy Adhesive Cartridges
Price: Price Per Tool = $906.78
Simpson EDTA22P Pneumatic Dispensing Tool for 22 oz. Epoxy Adhesive Cartridges
The EDTA22P tool features an optional suitcase handle adapter for the ultimate in tool configuration and dispensing convenience. The suitcase option enables easier and time-saving ground-level doweling. The heavy duty tool comes with a custom, blow-molded
Adhesive Dispensing Tool - Simpson EDTA56P
Simpson EDTA56P Pneumatic Dispensing Tool for 56 oz. Epoxy-Tie Adhesive Cartridges
Price: Price Per Tool = $944.04
Simpson EDTA56P  Pneumatic Dispensing Tool for 56 oz. Epoxy-Tie Adhesive Cartridges
The EDTA56P tool features an optional suitcase handle adapter for the ultimate in tool configuration and dispensing convenience. The suitcase option enables easier and time-saving ground-level doweling. The heavy duty tool comes with a custom, blow-molded
Simpson ADT813S Manual Dispensing Tool for 12.5 oz. Acrylic Adhesive Cartridges
Price: Price Per Tool = $106.56
Simpson ADT813S Manual Dispensing Tool for 12.5 oz. Acrylic Adhesive Cartridges
The ADT813S features a steel carriage for ultimate durability. The ADT813S also features double-gripping plates that help extend tool life.
Simpson EMN1.7-R Epoxy Adhesive Mixing Nozzle
Price: Price Per Nozzle = $5.54
Simpson EMN1.7-R Epoxy Adhesive Mixing Nozzle
A mixing nozzle for use with 1.7 oz. epoxy adhesives cartridges. This is a one-piece nozzle with integrated nut (separate retaining nut not required). Works with SET and SET-XP adhesives.
Simpson EMN22I Epoxy Adhesive Mixing Nozzle
Price: Price Per Nozzle = $4.76
Simpson EMN22I Epoxy Adhesive Mixing Nozzle
An 18-element mixing nozzle for use with 22 oz. and 56 oz. epoxy adhesives cartridges. This is a one-piece nozzle with integrated nut (separate retaining nut not required). Works with EDOT, ET-HP, SET and SET-XP adhesives.
Simpson EMN50 High Volume Epoxy Adhesive Mixing Nozzle
Price: Price Per Nozzle = $10.96
Simpson EMN50 High Volume Epoxy Adhesive Mixing Nozzle
Hi-volume nozzle for 22.oz. and 56 oz. cartridges (separate retaining nut not required). 17 long, major diameter 7/8. Works with EDOT, ET-HP, SET and SET-XP adhesives.
Shopping Cart
Your cart is empty.