Search
Browse Categories
Browse by Manufacturer

Simpson EDOT Epoxy Anchoring Adhesive

Epoxy Anchoring Adhesive - Simpson EDOT - 22 oz
Epoxy Anchoring Adhesive - Simpson EDOT - 22 ozEpoxy Anchoring Adhesive - Simpson EDOT - 56 oz
Price: From $20.00 to $55.30
Manufacturer: Simpson Strong-Tie
This product typically will ship same day

Product Options

Cartridge Size:
Formulated specifically for transportation projects, EDOT™ is a two-component, high-solids epoxy system.

It is designed for use as a high-strength, nonshrink anchor grouting material providing an economical and high-strength solution for transportation applications. Resin and hardener are dispensed and mixed simultaneously through the static mixing nozzle. EDOT meets the requirements of ASTM C-881 and AASHTO M235 specifications for Type I, II, IV and V, Grade 3, Class C.

USES

  • Threaded rod anchoring
  • Rebar doweling

APPLICATION

Surfaces to receive epoxy must be clean. The base material temperature must be 40ºF or above at the time of installation. For best results, material should be 70ºF–80ºF at the time of application. Cartridges should not be immersed in water to facilitate warming. To warm cold material, the cartridges should be stored in warm, uniformly heated area or storage container for a sufficient time to allow epoxy to warm completely. Mixed material in nozzle can harden in 5-7 minutes at a temperature of 40ºF or above.

SUGGESTED SPECIFICATION

Anchoring adhesives shall be a twocomponent high solids epoxy based system dispensed through a static mixing nozzle supplied by the manufacturer. Epoxy shall meet the minimum requirements of ASTM C 881 and AASHTO M235 specification for Type I, II, IV, and V, Grade 3, Class C, and must develop a minimum 10,000 psi compressive yield strength after 7 day cure. Epoxy must have a heat deflection temperature of a minimum 125ºF (52ºC). Adhesive shall be EDOT adhesive from Simpson Strong-Tie, Pleasanton, CA. Anchors shall be installed per Simpson Strong-Tie instructions for EDOT adhesive.

SHELF LIFE

24 months from date of manufacture in unopened container.

STORAGE CONDITIONS

For best results, store between 45ºF–90ºF. To store partially used cartridges, leave hardened nozzle in place. To re-use, attach new nozzle.

Related Products

Simpson EDT22S Manual Adhesive Dispensing Tool for 22 oz. Epoxy Adhesive Cartridges
Price: Price Per Tool = $104.84
Simpson EDT22S Manual Adhesive Dispensing Tool for 22 oz. Epoxy Adhesive Cartridges
The EDT22S epoxy adhesive tool features a steel carriage and is engineered for high-volume, continuous use. The tool can be easily convert from dispensing a 22 oz. 1:1 ratio cartridge to a 16.5 oz. 2:1 ratio cartridges.
Simpson EDTA22CKT Battery-Powered Dispensing Tool for 22 oz. Epoxy Adhesive Cartridges
Price: Price Per Tool = $1054.72
Simpson EDTA22CKT Battery-Powered Dispensing Tool for 22 oz. Epoxy Adhesive Cartridges
The EDTA22C offers power dispensing of 22 oz., 1:1 ratio, dual-cartridge adhesives without the need for a hose or compressor. The tool features dosage and rate control for maximum efficiency on the job. This heavy-duty dispensing tool is designed to work
Adhesive Dispensing Tool - Simpson EDTA22P
Simpson EDTA22P Pneumatic Dispensing Tool for 22 oz. Epoxy Adhesive Cartridges
Price: Price Per Tool = $906.78
Simpson EDTA22P Pneumatic Dispensing Tool for 22 oz. Epoxy Adhesive Cartridges
The EDTA22P tool features an optional suitcase handle adapter for the ultimate in tool configuration and dispensing convenience. The suitcase option enables easier and time-saving ground-level doweling. The heavy duty tool comes with a custom, blow-molded
Simpson EMN22I Epoxy Adhesive Mixing Nozzle
Price: Price Per Nozzle = $4.76
Simpson EMN22I Epoxy Adhesive Mixing Nozzle
An 18-element mixing nozzle for use with 22 oz. and 56 oz. epoxy adhesives cartridges. This is a one-piece nozzle with integrated nut (separate retaining nut not required). Works with EDOT, ET-HP, SET and SET-XP adhesives.
Simpson EMN37A-RP5 High Strength Epoxy Adhesive Mixing Nozzle - 5 pack
Price: Price Per Nozzle = $22.88
Simpson EMN37A-RP5 High Strength Epoxy Adhesive Mixing Nozzle - 5 pack
An 18-element, high-strength, mixing nozzle for dispensing epoxy adhesive through bulk metering equipment. Works with the EDOT adhesive. 5 per pack.
Simpson EMN50 High Volume Epoxy Adhesive Mixing Nozzle
Price: Price Per Nozzle = $10.96
Simpson EMN50 High Volume Epoxy Adhesive Mixing Nozzle
Hi-volume nozzle for 22.oz. and 56 oz. cartridges (separate retaining nut not required). 17” long, major diameter 7/8”. Works with EDOT, ET-HP, SET and SET-XP adhesives.
Shopping Cart
Your cart is empty.