Search
Browse Categories
Browse by Manufacturer

Simpson Epoxy (SET and ET-HP) Screen Tube Carbon Steel 5/8" Diameter

Screen Tube - Simpson Epoxy - Carbon Steel
Price: From $4.00 to $4.40
Manufacturer: Simpson Strong-Tie
This product typically will ship same day

Product Options

Length:
Screen tubes are used in hollow base material applications to contain adhesive around the anchor and prevent it from running into voids. Simpson Strong-Tie® screen tubes are specifically designed to work with AT, SET and ET-HP adhesives in order to precisely control the amount of adhesive that passes through the mesh. This results in thorough coating and bonding of the rod to the screen tube and base material. Order screen tubes based upon rod diameter and adhesive type. The actual outside diameter of the screen tube is larger than the rod diameter. Lenths available 6", 10" and 13". 

Material:

  • Acrylic screen tubes: 50 mesh stainless steel
  • Epoxy screen tubes: 60 mesh carbon steel

Epoxy (SET & ET-HP) Screen Tubes –
Carbon Steel

Related Products

Simpson Anchoring Adhesive - 22oz
Simpson ET-HP Anchoring Adhesive
Price: From $31.62 to $68.20
Simpson ET-HP Anchoring Adhesive
ET-HP® is a two-component, high-solids epoxy system for use as a high-strength, non-shrink anchor grouting material. Resin and hardener are dispensed and mixed simultaneously through the mixing nozzle.
Simpson SET Anchoring Adhesive
Price: From $15.76 to $92.76
Simpson SET Anchoring Adhesive
SET® is a two-component, 1:1 ratio, high-solids, epoxy-based adhesive for use as a high strength, non-shrink anchor grouting material. Resin and hardener are dispensed and mixed simultaneously through the mixing nozzle.
Simpson EMN22I Epoxy Adhesive Mixing Nozzle
Price: Price Per Nozzle = $4.76
Simpson EMN22I Epoxy Adhesive Mixing Nozzle
An 18-element mixing nozzle for use with 22 oz. and 56 oz. epoxy adhesives cartridges. This is a one-piece nozzle with integrated nut (separate retaining nut not required). Works with EDOT, ET-HP, SET and SET-XP adhesives.
Simpson EMN50 High Volume Epoxy Adhesive Mixing Nozzle
Price: Price Per Nozzle = $10.96
Simpson EMN50 High Volume Epoxy Adhesive Mixing Nozzle
Hi-volume nozzle for 22.oz. and 56 oz. cartridges (separate retaining nut not required). 17” long, major diameter 7/8”. Works with EDOT, ET-HP, SET and SET-XP adhesives.
Shopping Cart
Your cart is empty.